A set of 16 plugins
AB_LM v1.6.4 – gain control that allows you to compare and match the volume levels with the sample in the FX circuit (AB comparison). The plugin will be useful in situations when mixing or mastering, when it will be necessary to quickly determine the impact of a plugin (FX) or even a complex FX circuit on the sound.
AMM v1.0.6 is a 32-channel automatic microphone mixer. It offers several advanced mixing modes and extensive controls for each channel.
CS-3301 v1.5.8 – console plug-in with a gate, equalizer, compressor, saturator and oversampling.
CS-5501 v1.1.3 is an emulator of a multifunctional analogue console that provides all the necessary tools for processing all kinds of audio signals, such as vocals and instruments. It is the successor to the very successful CS-3301. It maintains the smooth sound of the CS-3301 and provides much greater flexibility in any tracking and mixing situations. Contains gate \ expander, de-esser, compressor, limiter and saturator.
dEQ6 v2.1.5 – 6 band stereo / MS dynamic equalizer with high quality oversampling and an accurate spectrum analyzer.
Built-in compressor / expander reduces or increases the gain in a certain frequency range.
dpMeter 4 v4.1.1 (free) – multi-channel meter
dpMeterXT v1.3.5 – plug-in and application for measuring volume level, fully compatible with EBU R128, ITU-R BS.1770 / 1771, ATSC A / 85 and several other volume level standards.
dPMeterXT supports multi-channel configuration, from 1.0 to 9.1 / 10.0, depending on your system configuration or DAW capabilities.
DynaRide v1.1.5 is a plugin that can automatically equalize the audio signal, which is very useful, for example, on vocal tracks.
DynaRide is a dynamic processor that offers several control options: the detector can respond to vocals, speech and separate bass signals using a switch. The response time is determined by the attack handle.
Euphonia v2.0.4 – Euphonia is the optimal audio spectrum balancing plugin that automatically adjusts any audio signal based on several standard average spectral curves. These standard curves have the advantage that they work very well with most audio devices.
FinalLoud2 v2.0.1 is a tool that helps you reach the target volume of any audio material while maintaining the set True Peak values. FinalLoud quickly solves a very difficult task in the field of audio: achieving a certain volume level for any audio material while maintaining the specified True Peak ceiling.
GainRider 2 v1.0.11 – amplifier (including vocal), which gives full control over the process. Full control – Gainrider allows you to control all aspects of the amplification process and provides a detailed visual feedback during signal processing for perfect mixing!
gEQ12 v2.2.2 – 12-band stereo / MS graphic equalizer with an accurate spectrum analyzer and minimum / linear phase mode.
Impress v1.9.16 is a broadband stereo compressor including side chain, pre-filtering and advanced resampling. The purpose of the tool was to cover a wide range of applications of compression applications in modern mixing and mastering.
ISOL8 v2.0.1 (free) – An advanced mixing monitoring tool. It divides the frequency range into 5 ranges. These 5 bands can be included as solo or individually disabled. This will help you focus on specific frequency ranges during the mixing and mastering process.
LA xLimit III v3.0.0 is an advanced broadband stereo limiter that includes ISP detection and oversampling. It offers control over a sharp change in the nature of the sound and adapts the release curves, as well as additional limiting for better performance in ISP detection mode. The purpose of the development is to cover a wide range of application of limiting in mixing and mastering in situations with a strong emphasis on low aliasing. An ideal tool to use as the last plugin in the process chain for mixing and mastering.
mvMeter2 v1.0.19 (free) – is a multi-factor signal meter, including RMS, EBUR128, VU and PPM measurements.
SLM2 v1.3.5 – SLM2 maximizer allows you to achieve the maximum possible volume of sound with minimal sound distortion. Attack / Release offers even more sound generation options.
ST1 v1.0.3 is a simple tool that allows you to adjust the width and panorama of a stereo audio signal. It includes a mono-to-stereo function, a stereo field enhancer, rich panning of the knob, which includes spectral panning and a bass focus function. The phase and correlation meter visually controls the pan position and stereo width.
sTilt v1.4.4